Black and Decker A96 1500mAh 9,6V NiCd
Black and Decker A96 1500mAh 9,6V NiCd
Black and Decker A96 1500mAh 9,6V NiCd
Black and Decker A96 1500mAh 9,6V NiCd
Black and Decker A96 1500mAh 9,6V NiCd
Black and Decker A96 1500mAh 9,6V NiCd

Black and Decker A96 1500mAh 9,6V NiCd

90548720

Capacity: 1500mAh
Voltage: 9,6V
Cells type: NiCd
Cells brand: Lishen
Condition: New
Warranty: 12 months

Choose different capacity

The battery fits the following power tools Black&Decker

◾ HP96K ◾

 

Replaces batteries with the markings:

◾ P/DA96 ◾ 90548720 ◾ A96 ◾

 

If you have not found your device or battery model in the list above, please write to us with using contact form. Our sales department will help you find the right battery or suggest a different solution.

Battery capacity
1500mAh
Battery voltage
9,6V
Cell type
Nickel-cadmium (NiCd)
Cell brand
Lishen
Condition
New
Warranty
12 months
Zastosowanie
Zamiennik
Capacity: 3000mAh Voltage: 9,6VCells type: NiMhCells brand: PanasonicCondition: NewWarranty:  24 months Choose different capacity 1,5Ah 1,9Ah 2,0Ah 3,0Ah 3,3Ah
Capacity: 1900mAh Voltage: 9,6VCells type: NiCdCells brand: PanasonicCondition: NewWarranty:  24 months Choose different capacity 1,5Ah 1,9Ah 2,0Ah 3,0Ah 3,3Ah
No reviews

1) The accurate working temperature
Batteries suffer very badly at extreme temperatures. If you want to extend the life of your battery, you should avoid overloading it too much. If your battery works for a very long time, that's why it is probably very hot. It is wise to pull it out of the device and wait 10-15 minutes until it cools down.

2) Battery overcharge
If you want your batteries to have a very long life, you should also avoid their deep discharge. If during daily work on the battery you see a fairly large decrease in the efficiency of the device powered by the battery, you should stop its work as soon as possible and connect the battery to the charger.

3) Battery rest
You must also remember that the discharged battery for proper operation needs about 5 minutes of "free charging" before connecting to ”normal” charging. During "free charging" our battery temperature will drop significantly which will obviously have a very beneficial effect during subsequent charging.

4) Appropriate storage of the battery
The life of batteries is also greatly influenced by their proper storage. If you are not going to use the battery in the near future, it is worth charging it for the level 60-70%. Charged battery should be put in a safe place with temperature above zero.

5) Battery formatting
If you have batteries based on popular NiCd cells, you should also remember that it is possible that the so-called "memory effect" may occur. Batteries with NiCd cells should be discharged at least once every three cycles, and then charged to 100% level. Through these actions you will keep the maximum capacity of the battery.

Frequently asked questions... and answers :-)

If my previous battery was NiCd and now I have NiMh, will my old charger work properly?
Batteries that have been built on both NiCD and NiMh cells can work in the same voltage ranges. They also have the same charging current. Thus practically every NiCd charger can also operate a NiMh battery. In case of any questions or doubts about the charger or batteries, please contact our customer service department.

Is it necessary to remove the battery from the device each time after work is completed?
Warto pamiętać, iż jeżeli nasz akumulator nie jest aktualnie używany, może pozostać w urządzeniu. Należy przy tym mieć świadomość, iż pozostawiając go tam na dłużej, może się rozładować. Dlatego istotne jest, aby naładować go do minimum 60%, jeżeli nie chcemy aby uległ rozładowaniu.

Guaranteed battery life
The guaranteed operating time on a given battery depends on the battery load at a given time. For example, if you use a battery for screwdriving, you will need less energy for this than, when working with a chain saw, and therefore, the operating time may be longer. Unfortunately, power tool such as chainsaws have a current flow of more than 25A, so the working time is shorter.

What is the difference between NiCd and NiMh batteries?
Newer models are NiMh cells. Their main advantage is the fact that they have a higher energy density as well as the lack of memory effect. Thus, in contrast to NiCd batteries, a newer model can be recharged at any time, without losing capacity.

If the purchase battery does not match my power tool, can I return it?
We have been selling on the Internet for many years, for this reason situations like this are not new to us. Thus, in order to meet the expectations of our customers and not to cause them any problems, anyone who has bought a product from us can return it within 14 days from the date of purchase.

This site uses cookies to deliver services in accordance with the Privacy Policy .
You can specify the conditions for storage or access of cookies in your browser.