Lithium-ion technology
No memory effect, the battery can be recharged at any time, whether the energy reserve is 50% or 90% used
A slight degree of self-discharge after 30 days of non-use, the battery still has over 96% of its nominal capacity, while in NiCd / NiMH batteries the capacity loss is about 25%, so after about 4 months, traditional batteries will self-discharge, while the battery Bosch lithium-ion will have over 85% of its capacity.
Flexible Power System
100% compatible with all new and existing Bosch Professional 18V power tools and chargers
The latest line of 18V ProCORE Li-ion batteries
Thanks to the latest cell technology and intelligent battery management, they achieve 87% more energy.
The new COOLPACK 2.0 housing has been designed to close individual cells even more precisely and to dissipate heat even better. This technology has made it possible to achieve 135% longer battery life compared to batteries with the previous CoolPack technology.
Copper cell connectors provide less drag and prevent loss of power. In addition, copper releases heat faster, preventing the cells from overheating.
Optimal heat dissipation thanks to the TPE sheet that closes all gaps between the cells and the side casing.
The side protection block and rubber caps protect the battery against any mechanical damage, the battery remains fully functional and functional even after a fall from a height of 3 meters.
Charging indicator
Don't be surprised with a discharged battery! You can check the battery level at any time using the convenient indicator.
The battery fits the following Bosch power tools:
- ◾ 17618 ◾ 17618-01 ◾ 25618-01 ◾ 25618-02 ◾ 3601H61S10 ◾ 36618-02 ◾ 37618 ◾ 37618-01 ◾ CCS180 ◾ CCS180B ◾ CCS180K ◾ CFL180 ◾ CRS180 ◾ CRS180B ◾ CRS180VK ◾ GVDR Li18VK ◾ GVDR Li18VK ◾ GVDR Li18VK 18 -2-Li ◾ GSR18VE-2-Li ◾ GSR18V-Li ◾
Replaces batteries marked with:
- ◾ 2 607 336 091 ◾ 2607 336 092 ◾ 2607 336169 ◾ 2 607336170 ◾ 2 607336235 ◾ 2 607 336 236 ◾ BAT609 ◾ BAT609G ◾ BAT618 ◾ BAT618G ◾ BAT619 ◾ BAT619G ◾
- Battery capacity
- 4000mAh
- Battery voltage
- 18V
- Cell type
- Litowo-jonowe
- Condition
- New
- Warranty
- 12 months
- Zastosowanie
- Oryginalna
1) The accurate working temperature
Batteries suffer very badly at extreme temperatures. If you want to extend the life of your battery, you should avoid overloading it too much. If your battery works for a very long time, that's why it is probably very hot. It is wise to pull it out of the device and wait 10-15 minutes until it cools down.
2) Battery overcharge
If you want your batteries to have a very long life, you should also avoid their deep discharge. If during daily work on the battery you see a fairly large decrease in the efficiency of the device powered by the battery, you should stop its work as soon as possible and connect the battery to the charger.
3) Battery rest
You must also remember that the discharged battery for proper operation needs about 5 minutes of "free charging" before connecting to ”normal” charging. During "free charging" our battery temperature will drop significantly which will obviously have a very beneficial effect during subsequent charging.
4) Appropriate storage of the battery
The life of batteries is also greatly influenced by their proper storage. If you are not going to use the battery in the near future, it is worth charging it for the level 60-70%. Charged battery should be put in a safe place with temperature above zero.
5) Battery formatting
If you have batteries based on popular NiCd cells, you should also remember that it is possible that the so-called "memory effect" may occur. Batteries with NiCd cells should be discharged at least once every three cycles, and then charged to 100% level. Through these actions you will keep the maximum capacity of the battery.
Our service address
Lupo sp.z o.o.
ul. Kraszewskiego 12
60-518 Poznan
Poland
Mon-Fri from 9 to 17
If my previous battery was NiCd and now I have NiMh, will my old charger work properly?
Batteries that have been built on both NiCD and NiMh cells can work in the same voltage ranges. They also have the same charging current. Thus practically every NiCd charger can also operate a NiMh battery. In case of any questions or doubts about the charger or batteries, please contact our customer service department.
Guaranteed battery life
The guaranteed operating time on a given battery depends on the battery load at a given time. For example, if you use a battery for screwdriving, you will need less energy for this than, when working with a chain saw, and therefore, the operating time may be longer. Unfortunately, power tool such as chainsaws have a current flow of more than 25A, so the working time is shorter.
Can an old battery be reconditioned?
If you have a battery to regenerate, please visit our customer service department. Our company regenerates as much as 95% of batteries. However, it should be remembered that although we are able to prepare virtually every package of cells that is available on the market, the price of the service does not only include the cost of materials. The cost of our service technician's work should also be added to the price.
If the purchase battery does not match my power tool, can I return it?
We have been selling on the Internet for many years, for this reason situations like this are not new to us. Thus, in order to meet the expectations of our customers and not to cause them any problems, anyone who has bought a product from us can return it within 14 days from the date of purchase.
Grade Comments (0)