Your cart
There are no more items in your cart
Regeneration Schwaiger SF9000 SF9002 18V
Out-of-Stock
zł97.56
Tax included
Voltage: 18V
Capacity: 3300mAh
Number of links: 4
Warranty: 12 months
Battery regeneration - what is it?
When we say a battery is worn out, only the cells are really damaged. This means you don't have to throw the entire battery in the garbage and buy a new one. Instead, you can regenerate the old one - that is, open the battery and replace the damaged cells in it. The old casing and other electronic parts of the battery will be retained. Our company will do it for you in a professional and cheap way. We will also check whether the battery is functioning properly, and if necessary, we will also replace the resistors and the thermistor.
How do we regenerate batteries?
- At the beginning, we open the battery and disassemble the used cells
- We thoroughly clean the battery housing and its individual parts
- We weld new cells
- We check if the resistors and thermistor function properly, if not, we install new ones
- Finally, we install a package of new cells in the housing and close it.
Why should batteries be regenerated?
First of all, it is a very economical solution. Replacing cells in an old battery costs much less than buying a new one. Since the old housing is retained, there is no problem fitting the battery. This solution is also very ecological, it allows you to reduce the amount of raw materials used and waste produced.
How long does the order take?
We try to fulfill all orders very quickly. For 7.2V-18V batteries it takes 2-3 working days, 24-36V up to five working days. This time may be slightly longer if we have many orders.
Warranty
We provide a guarantee for our services: from six to twenty-four months, depending on the type of cells selected.
How to order battery regeneration in our company?
To meet your needs, we have prepared four forms of ordering the battery regeneration:
- Place an order through our website.
- Sending us the equipment with the attached order form.
- Send the equipment to us with your contact details and address attached.
- Sending the battery to us along with completing our online battery regeneration order form, which is quick and convenient
Our address:
Lupo sp. z o.o.
ul. Kraszewskiego 12
60-518 Poznań
Have additional doubts? Please visit our help pages where you can find answers to questions related to the Hilti battery regeneration service offered.
- Battery capacity
- 3300mAh
- Battery voltage
- 18V
- Number of cells
- Warranty
- 12 months
No reviews
1) The accurate working temperature
Batteries suffer very badly at extreme temperatures. If you want to extend the life of your battery, you should avoid overloading it too much. If your battery works for a very long time, that's why it is probably very hot. It is wise to pull it out of the device and wait 10-15 minutes until it cools down.
2) Battery overcharge
If you want your batteries to have a very long life, you should also avoid their deep discharge. If during daily work on the battery you see a fairly large decrease in the efficiency of the device powered by the battery, you should stop its work as soon as possible and connect the battery to the charger.
3) Battery rest
You must also remember that the discharged battery for proper operation needs about 5 minutes of "free charging" before connecting to ”normal” charging. During "free charging" our battery temperature will drop significantly which will obviously have a very beneficial effect during subsequent charging.
4) Appropriate storage of the battery
The life of batteries is also greatly influenced by their proper storage. If you are not going to use the battery in the near future, it is worth charging it for the level 60-70%. Charged battery should be put in a safe place with temperature above zero.
5) Battery formatting
If you have batteries based on popular NiCd cells, you should also remember that it is possible that the so-called "memory effect" may occur. Batteries with NiCd cells should be discharged at least once every three cycles, and then charged to 100% level. Through these actions you will keep the maximum capacity of the battery.
Our service address
Lupo sp.z o.o.
ul. Kraszewskiego 12
60-518 Poznan
Poland
Mon-Fri from 9 to 17
0
0
If my previous battery was NiCd and now I have NiMh, will my old charger work properly?
Batteries that have been built on both NiCD and NiMh cells can work in the same voltage ranges. They also have the same charging current. Thus practically every NiCd charger can also operate a NiMh battery. In case of any questions or doubts about the charger or batteries, please contact our customer service department.
1
0
Guaranteed battery life
The guaranteed operating time on a given battery depends on the battery load at a given time. For example, if you use a battery for screwdriving, you will need less energy for this than, when working with a chain saw, and therefore, the operating time may be longer. Unfortunately, power tool such as chainsaws have a current flow of more than 25A, so the working time is shorter.
1
0
Can an old battery be reconditioned?
If you have a battery to regenerate, please visit our customer service department. Our company regenerates as much as 95% of batteries. However, it should be remembered that although we are able to prepare virtually every package of cells that is available on the market, the price of the service does not only include the cost of materials. The cost of our service technician's work should also be added to the price.
1
0
If the purchase battery does not match my power tool, can I return it?
We have been selling on the Internet for many years, for this reason situations like this are not new to us. Thus, in order to meet the expectations of our customers and not to cause them any problems, anyone who has bought a product from us can return it within 14 days from the date of purchase.
1
0
Tap to zoom
Grade Comments (0)