Regeneration 3M Adflo 837630 10,8V li-ion / 7,4V NiMh

Reference 837630

zł126.83

Tax included

Voltage: 10,8V / 7,4V
Cells type: Li-ion / NiMh
Cells brand: Samsung / Sanyo
Warranty: 12 months

Battery capacity after regeneration/cell manufacturer/warranty

Regeneration of Adflo batteries is a process that consists in repairing a broken device by replacing used cells and inspecting the condition of other components. This treatment has a large group of supporters, because it allows you to restore the full efficiency of the equipment, without forcing the customer to buy a new, factory model. In addition, regeneration is possible in the vast majority of failure cases, making this operation not only affordable, but also extremely effective.

1 . Adflo battery regeneration consists of several obligatory phases.

2 . At the beginning, specialists carefully open the delivered device and disassemble the cells that, as a result of long work, have ceased to fulfill their duties properly.

3 . After cleaning the battery and preparing the housing for re-use, a new package of cells is installed, which will enable the correct operation of the power tools.

4 . If there are no defects in the resistors and the thermistor, the equipment case is twisted and the last step in the regeneration process is to test the battery efficiency.

5 . The lack of malfunctions in the operation of the device proves that the repair was successful.

The main advantage of regeneration are, of course, financial factors, but they are not the only factors that make this treatment so popular. Regeneration also allows you to keep the original electrical parts and the housing unchanged, thanks to which the battery is practically no different from its original version. The ecological aspects are also an advantage of this treatment. Regeneration is much more beneficial to the environment than buying a new device and recycling broken equipment. A regenerated battery also has a warranty period. Customers have the option of submitting a complaint about the repaired device within the time range from 6 to 24 months, depending on the type of equipment.

Battery regeneration can be ordered in several different ways. The basic and most frequently used method is placing an order via our website, but this is not the only option, because it is also possible to send the battery with the address and contact details, or to send the device and fill in a special form that is on our website.

Address of our service:

Lupo sp. z o.o.
ul. Kraszewskiego 12
60-518 Poznań

ean13 5903940350066

upc 5800

No reviews

1) The accurate working temperature
Batteries suffer very badly at extreme temperatures. If you want to extend the life of your battery, you should avoid overloading it too much. If your battery works for a very long time, that's why it is probably very hot. It is wise to pull it out of the device and wait 10-15 minutes until it cools down.

2) Battery overcharge
If you want your batteries to have a very long life, you should also avoid their deep discharge. If during daily work on the battery you see a fairly large decrease in the efficiency of the device powered by the battery, you should stop its work as soon as possible and connect the battery to the charger.

3) Battery rest
You must also remember that the discharged battery for proper operation needs about 5 minutes of "free charging" before connecting to ”normal” charging. During "free charging" our battery temperature will drop significantly which will obviously have a very beneficial effect during subsequent charging.

4) Appropriate storage of the battery
The life of batteries is also greatly influenced by their proper storage. If you are not going to use the battery in the near future, it is worth charging it for the level 60-70%. Charged battery should be put in a safe place with temperature above zero.

5) Battery formatting
If you have batteries based on popular NiCd cells, you should also remember that it is possible that the so-called "memory effect" may occur. Batteries with NiCd cells should be discharged at least once every three cycles, and then charged to 100% level. Through these actions you will keep the maximum capacity of the battery.

Our service address

Lupo sp.z o.o.

ul. Kraszewskiego 12

60-518 Poznan

Poland

Mon-Fri from 9 to 17

0 1

If my previous battery was NiCd and now I have NiMh, will my old charger work properly?

Batteries that have been built on both NiCD and NiMh cells can work in the same voltage ranges. They also have the same charging current. Thus practically every NiCd charger can also operate a NiMh battery. In case of any questions or doubts about the charger or batteries, please contact our customer service department.

0 1

Guaranteed battery life

The guaranteed operating time on a given battery depends on the battery load at a given time. For example, if you use a battery for screwdriving, you will need less energy for this than, when working with a chain saw, and therefore, the operating time may be longer. Unfortunately, power tool such as chainsaws have a current flow of more than 25A, so the working time is shorter.

0 0

Can an old battery be reconditioned?

If you have a battery to regenerate, please visit our customer service department. Our company regenerates as much as 95% of batteries. However, it should be remembered that although we are able to prepare virtually every package of cells that is available on the market, the price of the service does not only include the cost of materials. The cost of our service technician's work should also be added to the price.

1 0

If the purchase battery does not match my power tool, can I return it?

We have been selling on the Internet for many years, for this reason situations like this are not new to us. Thus, in order to meet the expectations of our customers and not to cause them any problems, anyone who has bought a product from us can return it within 14 days from the date of purchase.